TECHNICAL DATA DURAFLO

EXPOSURE CONTROLS/PERSONAL PROTECTION

Exposure Controls/Personal Protection
Eye	None required; however, use of eye protection is good industrial practice.
Skin	None required; however, use of protective gloves/clothing is good industrial practice.
Inhalation	None required; however, use of adequate ventilation is good industrial practice.
Engineering Controls	Control airborne concentrations below the exposure guidelines.

Component	CAS#	Exposure Limits
Polypropylene	9003-07-0	OSHA Total Dust: 15 mg/m³ (particulate NOC) OSHA Repirable Dust: 5 mg/m³ (particulate NOC) ACGIH TLV-TWA: 10 mg/m³ (total dust) (particulate NOC)
Lubricants: fatty acids and/or esters	Blend	No exposure limit established.
Pigments *	Mixture	No exposure limit established.
Carbon black *	1333-86-4	OSHA PEL: 3.5 mg/m³ ACGIH TWA: 3.5 mg/m³ (data for powder)

• This product is encapsulated in polyolefin resin and does not possess the same hazards as the powdered, pure material.

CHEMICAL AND PHYSICAL PROPERTIES

Chemical and Physical Properties
Appearance and Odor	Non-woven fabric. Odorless.
Color	Tan, black, gray, white, dark green or combinations thereof.
Melting Point	320°F (160°C)
Solubility in Water	Negligible, below 0.1%
Specific Gravity (Water = 1)	0.9

STABILIITY AND REACTIVITY

Stability and Reactivity
Stability	Stable
Conditions to Avoid	None identified.
Materials to Avoid	None identified.
Hazardous Decomposition	Incomplete burning can produce carbon monoxide and/or carbon dioxide and other harmful products.
Hazardous Polymerization	Will not occur.

REGULATORY INFORMATION

CERCLA SECTIONS 102a/103 HAZARDOUS SUBSTANCES (40 CFR Part 302.4):This product is not reportable under 40 CFR Part 302.4.

SARA TITLE III SECTION 302 EXTREMELY HAZARDOUS SUBSTANCES (40 CFR Part 355): This product is not regulated under Section 302 of SARA and 40 CFR Part 355.

SARA TITLE III SECTIONS 311/312 HAZARDOUS CATEGORIZATION (40 CFR Part 370): This product may contain ingredients in the fiber lubricant package that are listed under SARA Sections 311/312: Acute Health Hazard. However, at levels below 1% of the product weight, it is not anticipated that a “Reportable Quantity” threshold will be reached with typical fabric inventories.

SARA TITLE III SECTION 313 (40 CFR Part 372): This product is not regulated under Section 313 of SARA and 40 CFR Part 372.

CANADIAN REGULATIONS

CONTROLLED PRODUCTS REGULATIONS (CPR): This product has been classified in accordance with the criteria of the Controlled Productions Regulations (CPR), and the MSDS contains all the information required by CRP.

WHMIS CLASSIFICATION: Not a Controlled Product under Canada’s Workplace Hazardous Materials Information System.

OTHER INFORMATION

ISSUED: August 31, 2006

This Material Safety Data Sheet conforms to the requirements of ANSI Z400.1-2004

NOTICE: This publication should not be construed as engineering advice. While information contained in this publication is accurate to the best of our knowledge, Duraflo does not warrant its accuracy or completeness. The ultimate customer and user of the products should assume sole responsibility for the final determination of the suitability of the information and the products for the contemplated and actual use. The only warranty made by Duraflo for its products is set forth in our products sheets for the product, or such other written warranty as may be good by Duraflo and individual customers. Duraflo specifically disclaims all other warranties express or implied, including without limitation, warranties of merchantability or fitness for a particular purpose, or arising from provision of samples, a course of dealing or usage of trade.